Kenmore He5 Dryer Not Starting. Use a multimeter to test the start switch for continuity. If the dryer hums but does not start, the start switch is not at fault.
Use a multimeter to test the start switch for continuity. I just cleaned out tons of lint from the collection unit, and below. Now sensing/revised time light comes on.
Table of Contents
Now Sensing/Revised Time Light Comes On.
To check these components, unplug the dryer I have a kenmore elite he5 electric dryer model number 110.87081601. However, some dryers have a switch that shuts off power to the dryer if the drive belt is broken.
You Could Have A Blown Thermal Fuse Or A Broken Belt In The Dryer.
Here's how the problems started. If you hear a click from the control board then the door switch and the control board are likely okay. 5 minutes later the dryer tripped the breaker again.
Now Sensing/Revised Time Light Comes On.
I have a kenmore elite he5 electric dryer model number 110.87081601. The most common reason for such problems is an overloaded outlet or circuit. I just cleaned out tons of lint from the collection unit, and below.
I Purchased This Thing About 2.5 Years Ago, It's An Elite He5.
First, start the dryer and then listen for a humming noise. If a kenmore dryer’s start switch button is constantly engaged but the machine won’t turn on, it may be an indication of either a defective power cord or a defective control panel. My wife finished a load of laundry waited 10 minutes and started another load.
20++ Kenmore Dryer Won't Start But Light Is On Jay's Blog.
On most dryers, when the dryer belt breaks, the motor will still run, but the drum won’t turn. Use a multimeter to test the start switch for continuity. I just cleaned out tons of lint from the collection unit, and below.
