Toyota Highlander Remote Start Not Working. Press the lock button again, this time holding it for 3 seconds. Remote start system not working on toyota highlander.
Requires adequate cellular coverage and gps signal strength. In order to remotely start your toyota, press the lock button on your key fob three times. Remote start feature is not applicable to vehicles equipped with manual transmission.
Building And/Or Parking Structures May Limit System Effectiveness.
Using the key fob to remote start a remote connect equipped toyota: Try installing toyota remote connect on another phone if it still doesn't work you will have to call toyota again or go to the dealer to have them look at it. See toyota dealer for details.
Your Vehicle Is Low On Fuel.
Be sure to quickly press the lock button the first two times, while holding the button for about three seconds for the third time. · vehicle is not in park. Toyota highlander remote start not working.
** Forgot To Add, That I Have Seen This Error Before On My Side At Least Once But Ever Since Then It Worked With No Problems.
To start the engine, just press and release the lock button twice. I brought it to the dealer for service and they told me there was a loose fuse and the remote started working again and the tpms went away. As a safety precaution, the remote start system will only work if the car is in ‘park’.
Update 12/11/2021 @ 2:20 Pm Et:
Simply insert the key in the ignition and turn it ‘on’ and. One or more of the vehicle doors are open, make sure they are securely closed. May not work in all areas.
Requires Adequate Cellular Coverage And Gps Signal Strength.
Press the lock button a second time within 1 second. One or more of the vehicle doors are open, make sure they are securely closed. I have a 2008 toyota highlander that the remote entry is not working.